There are many factors for air filter failure, and the following three causes of air filter failure are our most common failures. As long as you can effectively avoid these three, you can reduce the probability of air filter failure by 50%. Anping Dongjie Filter has new technical capabilities and filtration systems, and we do our best to provide customers with complex filtration solutions.

Failure cause 1: The housing of the air filter has changed

The main reason for this is that the pressure on the air filter is greater than the pressure on itself. We need to fully consider the pressure that the air filter can withstand when designing, and at the same time we should do a good job of air filter Only in this case can we minimize the daily failure of the air filter and ensure the safety of the air filter.

Failure reason 2: The filter element of the air filter is faulty

This is a relatively common failure. The main cause of these two failures is the expansion and flattening of the air filter. This failure is caused by the working process of the air filter. To avoid this situation, we need to choose a high-quality Air filter is very necessary.

Failure reason three: The model selection of the air filter is wrong.

There are many customers who make mistakes in the model selection of the air filter. The reason for this is that the customer does not know what their needs are, which leads to this common daily failure.

There are often various failures of the air filter, and the air filter will stop working for various reasons. We need to understand its working principle. In pneumatic technology, the air filter, pressure reducing valve and lubricator are called the three major pneumatic components. In order to obtain multiple functions, these three kinds of air source processing components are often assembled together in sequence, which is called pneumatic triple. Used for air source purification, filtration, decompression and lubrication. In the air filter failure, analyze the whole in detail, and solve the problems one by one.

The compressed air from the air source contains excessive water vapor and oil droplets, as well as solid impurities such as rust, sand, pipe sealants, etc., which will damage the piston seal ring and block the small vent holes on the components. Shorten the service life of components or make them invalid. The function of the air filter is to separate the liquid water and liquid oil droplets in the compressed air, and to filter out the dust and solid impurities in the air, but it cannot remove the gaseous water and oil.

There are many small tips about the daily maintenance of the air filter, and I will share them with you later. You are welcome to follow me. Also, what unique insights do you have? You are very welcome to discuss with me,