What should be paid attention to when operating the punching mesh machine?

1. The punching net operator must go through study, master the structure and performance of the equipment, be familiar with the operating procedures and obtain the operating license before they can operate independently.

2. Correctly use the safety protection and control devices on the equipment, and do not dismantle them at will.

3. Check whether the transmission, connection, lubrication and other parts of the machine tool and the protection and safety devices are normal. The screws for installing the mold must be firm and must not move.

4. The machine tool should be idling for 2-3 minutes before working, check the flexibility of the foot brake and other control devices, and confirm that it is normal before it can be used.

5. When installing the mold, it should be tight and firm, the upper and lower molds are aligned to ensure that the position is correct, and the machine tool is moved by hand to test punch (empty car) to ensure that the mold is in good condition.

6. Pay attention to lubrication before turning on the machine, and remove all floating items on the bed.

7. When the punch is removed or in operation, the operator should stand properly, keep a certain distance between the hands and head and the punch, and always pay attention to the movement of the punch, and it is strictly forbidden to chat or make phone calls with others.

8. When punching or making short and small workpieces, use special tools, and do not directly feed or take parts by hand.

9. When punching or making long-body parts, a safety rack should be set up or other safety measures should be taken to avoid digging injuries.

10. When rushing alone, hands and feet are not allowed to be placed on the hand and foot brakes. You must rush and move (step) once to prevent accidents.

11. When more than two people work together, the person responsible for moving (stepping) the gate must pay attention to the action of the feeder. It is strictly forbidden to pick up the item and move (step) the gate at the same time.

12. At the end of the work, stop in time, cut off the power supply, wipe the machine tool, and clean up the environment.