Spray what attention to the problem? This problem for many manufacturers, may not be a problem, but there are a lot of details do not know if you have noticed, if you have questions, just read on
First of all, before the surface treatment of punching mesh, we have to ensure the cleanliness of the surface of the product, such as: The paint used to remove rust, the rust generated on the surface, the dust of the mask, etc., whether these substances are cleaned up, although it is a small aspect, but it can have a certain impact on the spray process of the punching net, therefore, before spraying must be checked to ensure that the surface of the net is clean.
Secondly, the quality of spray powder is also the point that we need to pay special attention to. We should know that the final spray effect has a great relationship with the quality of spray powder.
Therefore, if the final spray anticorrosion treatment is good, we need better quality spray materials. If cheap, the application of relatively low price, low quality spray powder, spray product effect will be very poor, similarly, in the long-term application process, there will be surface cracking condition.
In view of this, Anping Dongjie mesh has been using high quality spray powder, to ensure product quality.
In spraying, there are also several aspects to pay attention to:
Spraying distance: This should be determined according to the distance between the mesh, in general, in the field of punching mesh products spray, people use the spray spacing range between 100 mm and 300 mm, this is the most ideal value of punching mesh products spray spacing.
Corner spraying: when the surface of the punching net is sprayed with plastic, we try to spray the corner parts first, when the corner parts are processed, we then carry out other parts of the treatment. If necessary, the Angle and voltage standard of the spray tool can be adjusted.
Powder amount: Mention this problem, first of all, we have to look at the basic conditions of the punching net spray product itself, such as: pass, aperture, groove, etc. These parts can be left and right punching net spray quality, in addition to warn you one point, if it is the box structure of the punching net product spray, we should pay attention to the proper placement of plastic powder, otherwise, it is easy to lead to the accumulation of plastic powder in its internal, in order to ensure the health standards and quality of products.
The above are our attention points sorted out in years of experience, if your products need spray treatment, we can provide you with a very good experience, so you are welcome to bring your plan to communicate with us.
CONTACT US
Are you still looking for a stable supplier? If you are still troubled by the communication of quality and details, please contact us—Anping Dongjie Wire Mesh.
Focusing on the wire mesh industry for more than 27 years, we have our own factory and professional team to escort your project!
0086-15930870079
NEED HELP?
Don’t hesitate to ask us something. Email us directly at admin@dongjie88.com or call us at 0086-15930870079.
GIVE US A CALL
As a high-quality Chinese manufacturer with more than 27 years of professional production experience, we will recommend the most suitable solution to you one-on-one according to your needs.
AVAILABLE AT 9AM TO 6PM
Post time: May-31-2023