The wind dust fence is processed into windproof plates with certain geometric shapes and different pass shapes according to the results of the wind tunnel experiment on the construction site, and the windproof and dust suppression wall is combined according to the site conditions. The product principle is to use the principle of aerodynamics to effectively control the source of dust - wind power.
The reasons for using punching mesh are as follows:
1. Good permeability: the holes of the punching net are dense and uniform, which can ensure the permeability of the wind and dust suppression net and prevent the poor ventilation caused by the wind and dust suppression net.
2. Strong wind resistance: the hole design of the punching net can effectively disperse the wind, reduce the influence of wind on the wind and dust suppression net, and improve the wind resistance performance of the wind and dust suppression net.
3. Good dust suppression effect: the holes of the punching net can screen out smaller dust particles to prevent dust from entering the inside of the windproof dust suppression net, thereby improving the dust suppression effect of the windproof dust suppression net.
4. Good corrosion resistance: the punching mesh is made of stainless steel or galvanized steel plate, which has good corrosion resistance and can ensure the service life of the wind and dust suppression mesh.
In summary, the punching mesh has the advantages of good air permeability, strong wind resistance, good dust suppression effect, good corrosion resistance, so it is one of the ideal materials for wind and dust suppression mesh.
There are three main specifications of wind and dust suppression network:
Single-peak type: the molding width is between 250mm-500mm, the peak height is 50mm-100mm, and the length can be processed within 8 meters.
Double peak type: the forming width is between 400mm-600mm, the peak height is 50mm-100mm, and the length can be processed within 8 meters.
Three-peak type: the forming width is 810mm,825mm,860mm,900mm, etc., the peak height is 50mm-80mm, and the length can be processed within 8 meters.
The thickness of the plates is 0.5mm-1.5mm.
The above are conventional size specifications, other specifications can be customized according to customer requirements.
Your inquiry is welcome!
CONTACT US
Are you still looking for a stable supplier? If you are still troubled by the communication of quality and details, please contact us—Anping Dongjie Wire Mesh.
Focusing on the wire mesh industry for more than 27 years, we have our own factory and professional team to escort your project!
0086-15930870079
NEED HELP?
Don’t hesitate to ask us something. Email us directly at admin@dongjie88.com or call us at 0086-15930870079.
GIVE US A CALL
As a high-quality Chinese manufacturer with more than 27 years of professional production experience, we will recommend the most suitable solution to you one-on-one according to your needs.
AVAILABLE AT 9AM TO 6PM
Post time: Aug-25-2023