With the rapid development of the economy, the storage and transportation volume of coal, mineral powder, sand ash, and other bulk materials is increasing, and the resulting dust is also more and more people's attention. Moreover, with the further strict laws and regulations of energy conservation and environmental protection in various countries, the dust pollution and energy consumption of coal yards have become the focus of local government management.

The total blockade project for the coal plant not only costs a lot of money, but also the stacking site is limited by the ceiling span and bucket wheel machine operation requirements, plus ventilation and isolation

At present, it is difficult to promote the implementation due to the factors of heat, dust prevention, lighting, narrow space, and inconvenient access of vehicles. However, the dust screen technology has been widely used in foreign countries,

Because of small investment and good dust suppression effect, it is more and more welcomed by enterprises.

How to produce high-quality wind dustproof fence?

The continuous haze weather covers most parts of the country, and the environmental protection supervision departments of various countries are more strict in dust monitoring of polluting enterprises. Dust net as a large number of coal, chemical raw materials, materials stacking enterprises, is an effective device to reduce dust. However, the production enterprises of the dustproof net in the market are very different, so how to produce a high-quality dustproof net?

1. To produce a high-quality dust-proof net, we need to use advanced processing equipment for plate cutting and bending, and process high standard sample plate through scientific calculation.

2. Then punch the shear plate to ensure the uniform distribution and layout of the holes.

3. After the first two processes, you can enter the molding process. After the completion of the dust net molding, it is necessary to clean it, which will affect the quality of the staff when spraying.

4. Finally, electrostatic spraying is applied to the surface to meet the needs of various harsh environments.

Each link needs strict design, so as to produce high-quality dust net.

Four construction steps of Wind Dust Fence

1. Underground construction steps: pouring underground foundation by precast concrete blocks

2. The steel structure is mainly windproof and dust suppression net, which provides enough strength to resist the damage of strong wind to the dust prevention net, and also considers the overall beauty. In engineering design, the wind speed of 30ms and wind pressure of 750pa can be taken as design parameters

3. Specific installation of metal windproof and dust suppression net: the connection between the dust prevention net and the support is fixed with screws and pressing plates

4. Retaining brick wall: in order to prevent the leakage of coal particles in the rainy season or when there is wind, so as to avoid waste, 1.2-1.5 m retaining wall can be set at the lower part of the retaining wall

For the specifications of the wind dust fence, welcome to skip our product link:

Windbreak Fence Dust Fence Factory Direct Supply High Quality

Always welcome to your inquiry at any time.