Decorative punching plate punching is the punch in the flat plate out of the perforation or perforation of the stamping process.

So, how does the punch of the decorative punch plate operate?

 1. When punching, it is necessary to find the center and then punch into the plate, otherwise it is difficult to correct after punching.

2. The punch die should be carefully checked before punching, and there can be no cracks or skew. Lower punch face must be flat.

3, The plate should be smooth, the plate must be put flat before punching, keep both sides flat, prevent the tilt.

4. When punching both sides, when punching the opposite side of the plate, the needle must be flushed to the center of the positive hole to prevent the occurrence of step hole wall.

5. The aperture of the leakage disc selected by single side punching and the diameter of the punch should be appropriate. It can not be too large, or it will lead to crimping or out of shape.

6, In the process of punching, due to the contact between the needle and the plate will produce high temperature, simple variation or be clamped, should be soaked as soon as possible cooling.