China Galvanized metal filter end cap kit for dust air filters factory and suppliers

Galvanized metal filter end cap kit for dust air filters

Short Description:

Galvanized metal filter end cap kit for dust air filters
The filter element is installed on the vehicle and the engine. During the mechanical operation, vibration will occur, and the empty filter will bear a lot of stress. The filter end caps can effectively improve the bearing capacity of the filter material. The filter end cap is generally punched on one side so that the filter material can be placed. The end face and the groove for holding the adhesive, and the other side is bonded with a rubber seal, which plays the role of sealing the filter material and sealing the filter element channel.
Welcome to inquiry.

WhatsApp/WeChat: +8613363300602

Email: admin@dongjie88.com

Website: www.dj-metal-mesh.com

Whatsapp:0086-15930870079 Leave a message Download as PDF

Product Detail

About Us

Certifications

FAQ

Product Tags

Galvanized metal filter end cap kit for dust air filters

The filter end cap mainly serves to seal both ends of the filter material and support the filter material. It stamped into various shapes as needed from the steel sheet. The end cap is generally stamped into a groove on which the end face of the filter material can be placed and an adhesive can be placed, and the other side is bonded with a rubber seal to function to seal the filter material and seal the passage of the filter element.

-Production description-

The filter end cap mainly serves to seal both ends of the filter material and support the filter material. The filter end caps are stamped into various shapes as needed from the steel sheet.

At the same time, our company can be customized according to your needs.

Filter End Caps
Outer Diameter	Inside Diameter
200	195
300	195
320	215
325	215
330	230
340	240
350	240
380	370
405	290
490	330

-Applications-

-Why choose us-

Anping Dongjie Wire Mesh Products Co., Ltd., located in Anping, China is a specialized manufacturer for the development, design, and production of expanded metal mesh, perforated metal mesh, decorative wire mesh, and stamping parts for decades.

Dongjie has adopted ISO9001:2008 Quality System Certificate, SGS Quality System Certificate, and modern management system.

As always stuck into "Quality Proves Strength, Details Reach to Success", Dongjie achieves high acclaim in the old and new customers.

1. 25 years' experience in producing filter end caps.

2. Accurate size according to customer requirements

3. Ensure the filters have a longer life with excellent heat and chemical resistance.

4. Effectively improve the capacity of the filter material.

5. Various exist molds to save your cost.

6. Qualified raw materials with certifications to make the filter caps.

-Production process-

The materials used to produce filter end caps include galvanized steel, anti-fingerprint steel, stainless steel, and many other materials. The filter end caps have various shapes as different needs. Each of the three materials has its own advantages.

Galvanized steel is coated with zinc oxide to prevent rusting since the chemical compound takes far longer to corrode than steel. It also changes the steel’s appearance, giving it a rugged look. Galvanization makes the steel stronger and harder to scratch.

Anti-fingerprint steel is a kind of composite coating plate after fingerprint-resistant treatment on the surface of galvanized steel. Because of its special technology, the surface is smoother and it is non-toxic and environmentally friendly.

Stainless steel is material that anti-corrosion to the air, vapor, water and acid, alkali, salt, and other chemical corrosion media. The common kinds of stainless steel include 201, 304, 316, 316L, etc. It has no rust, long service life, and other characteristics.

-Packing&delivery-

Previous: Precision dust removal round end cover top cap and bottom cover

Next: Custom fingerprint-resistant sheet metal end caps for dust filter

ANPING DONGJIE WIRE MESH PRODUCTS CO., LTD

We are a specialized manufacturer for the development, design and production of expanded metal mesh, perforated mesh, and other wire mesh products over 24 years’ experience. Dongjie has adopted ISO9001:2008 Quality System Certificate, SGS Quality System Certificate and modern management system.

Anping Dongjie Wire Mesh Products Factory is founded in 1996 with over 10, 000 sqms areas. We have more than 100 professional workers and 4 professional workshops: expanded metal mesh workshop, perforated workshop, stamping wire mesh products workshop ,molds made and deep-processing workshop.

As always stuck into “Quality Proves Strength, Details Reach to Success”, Dongjie has achieved highly acclaim in the old and new customers.

Q1: Are you a manufacturer or a trader?

A1: We are a professional manufacturer of wire mesh products. We have been specialized in wire mesh for decades and accumulated rich experiences in this field.

Q2: How to make an inquiry?

A2: You need to provide material, sheet size, hole size and the quantity to ask an offer. You can also indicate if you have any special requirement.

Q3: Could you provide free sample?

A3: Yes, we can provide free sample in half A4 size together with our catalog. But the courier charge will on your side. We’ll send back the courier charge if you make an order.

Q4: How is your Payment Term?

A4: Generally, our payment term is T/T 30% in advance and the balance 70% against the copy of B/L. Other payment terms we can also discuss.

Q5: How is your delivery time?

A5: ①We always prepare enough stock material for your urgent requirement, the delivery time is 7 days for all the stock material. ② According to quantity and technology you required for the non-stock items to offer you the exact delivery time and producing schedule.

China Aluminum End Cap Supplier